APC Symmetra PX 32kW Scalable to 160kW, 400V with Integrated Modular Distribution – SY32K160H-PD
ups apc Symmetra PX 32kW Scalable to 160kW 400V SY32K160H-PD
APC Symmetra PX 32kW Scalable to 160kW, 400V w/ Integrated Modular Distribution
A high-efficiency 3-phase UPS with integrated modular distribution that can be right-sized to your data center power requirements. With scalable power, distribution and run-time, this UPS grows with your data center up to 160kW/160kVA. Suitable for small to medium data centers or individual zones of large data centers.
SY32K160H-PD Features
APC Symmetra PX 32kW Scalable to 160kW, 400V w/ Integrated Modular Distribution
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Manageable external batteries
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Swappable batteries
Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Symmetra PX Features & Benefits
Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Total Cost of Ownership
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
5×8 Start-up service included
Required for full coverage of factory warranty
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Agility
SmartSlot
Customize UPS capabilities with management cards.
Programmable frequency
Ensures compatibility with different input frequencies.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Availability
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Swappable power modules
Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Network manageable
Provides remote power management of the UPS over the network.
Marketing Features
User-replaceable power modules
Enables simple upgrades and replacements of the Power Modules.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Network manageable
Provides remote power management of the UPS over the network.
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Specifications APC Symmetra PX 32kW Scalable to 160kW 400V SY32K160H-PD
Output |
|
Output power capacity |
32.0 KWatts / 32.0 kVA |
Max Configurable Power (Watts) |
160.0 KWatts / 160.0 kVA |
Nominal Output Voltage |
230V , 400V 3PH |
Neutral Output Current |
80 A |
Output Voltage Note |
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
Efficiency at Full Load |
95.0 % |
Output Voltage Distortion |
Less than 2% |
Output Frequency (sync to mains) |
50/60 Hz +/- 3 Hz user adjustable +/- 0.1 |
Output Frequency (not synced) |
50Hz +/- 0.1% for 50Hz nominal |
Other Output Voltages |
380, 400, 415 |
Load Crest Factor |
Unlimited |
Topology |
Double Conversion Online |
Waveform type |
Sine wave |
Overload Operation |
10 minutes @ 125% and 60 seconds @ 150% |
Output Connections |
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup) |
Output Voltage THD |
< 2% for 0 to 100% linear load and < 5% for full non linear load |
Output Voltage Tolerance |
+/-1% static and +/- 5% at 100% load step |
Bypass |
Built-in Static Bypass |
Input |
|
Nominal Input Voltage |
400V 3PH |
Input frequency |
40 – 70 Hz |
Input Connections |
Hard Wire 5-wire (3PH + N + G) |
Input voltage range for main operations |
340 – 477 V |
Efficiency at Full Load |
95.0 % |
Input Total Harmonic Distortion |
Less than 5% for full load |
Type of Input Protection Required |
gL fuse |
Other Input Voltages |
380, 400, 415 |
Maximum Short Circuit Withstand (Icw) |
30.0 kAmps |
Maximum Input Current |
59.0 A |
Input Power Factor at Full Load |
0.99 |
Batteries & Runtime |
|
Battery type |
VRLA |
Included Battery Modules |
3 |
Typical recharge time |
3.5 hour(s) |
Nominal Battery Voltage |
+/-192 V (split battery referenced to neutral) |
End of Discharge Maximum Battery Current |
110.0 A |
Battery Slots Empty |
6 |
RBC Quantity |
4 |
DC Overcurrent Protection |
756 A |
Extendable Run Time |
1 |
Battery Volt-Amp-Hour Capacity |
10368 |
End of Discharge Battery Voltage |
+/-154 V |
Efficiency in Battery Operation |
94.0 % |
Maximum Available Short Circuit Current |
2 kAmps |
Overload Operation |
10 minutes @ 125% and 60 seconds @ 150% |
Communications & Management |
|
Control panel |
Multi-function LCD status and control console |
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) |
Yes |
Available SmartSlot™ Interface Quantity |
2 |
Physical |
|
Maximum Height |
1991 mm , 199.1 CM |
Maximum Width |
1200 mm , 120.0 CM |
Maximum Depth |
1070 mm , 107.0 CM |
Rack Height |
42 U |
Net Weight |
1095.4 KG |
Shipping weight |
1189.0 KG |
Shipping Height |
2140 mm , 214.0 CM |
Shipping Width |
1696 mm , 169.6 CM |
Shipping Depth |
1210 mm , 121.0 CM |
Color |
Black |
Environmental |
|
Operating Environment |
0 – 40 °C |
Operating Relative Humidity |
0 – 95 % |
Operating Elevation |
0-999.9 meters |
Storage Temperature |
-15 – 40 °C |
Storage Relative Humidity |
0 – 95 % |
Storage Elevation |
0-15000 |
Audible noise at 1 meter from surface of unit |
61.0 dBA |
Online thermal dissipation |
5146.0 BTU/hr |
Protection Class |
NEMA 1, IP 20 |
Conformance |
|
Approvals |
EN 50091-1, EN/IEC 62040-1-1, EN/IEC 62040-3, Eurobat General Purpose, FCC Part 15 Class A, ISO 14001, ISO 9001, VFI-SS-111 |
Standard warranty |
1 year on-site repair or replace with factory authorized Start-Up |
General |
|
Bypass Connection |
5 wire (3PH + N + G) |
Bypass Protection Device |
250.0 |
Max Bypass Input Current |
250.0 A |
Kata Kunci Terkait :
APC Symmetra PX 32kW Scalable to 160kW 400V, SY32K160H-PD, jual apc SY32K160H-PD, harga apc SY32K160H-PD, uos apc SY32K160H-PD, apc ups 3 phase