APC Symmetra PX AIO 48kW Scalable to 48kW 400V – SY48K48H-PD
APC Symmetra PX All-In-One 48kW Scalable to 48kW, 400V
Scalable power, runtime & distribution in a high-density, single-frame design. This high-efficiency 3-phase UPS scales as your data center grows up to 48kW/48kVA. Suitable for small & medium data center applications.
Includes: Network Management Card , Start-Up Service
SY48K48H-PD Features
APC Symmetra PX All-In-One 48kW Scalable to 48kW, 400V
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageable external batteries
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Swappable batteries
Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Symmetra PX Features & Benefits
Marketing Features
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Network manageable
Provides remote power management of the UPS over the network.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
User-replaceable power modules
Enables simple upgrades and replacements of the Power Modules.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Audible alarms
Provides notification of changing utility power and UPS power conditions
Total Cost of Ownership
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
5×8 Start-up service included
Required for full coverage of factory warranty
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Agility
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
SmartSlot
Customize UPS capabilities with management cards.
Programmable frequency
Ensures compatibility with different input frequencies.
Availability
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Network manageable
Provides remote power management of the UPS over the network.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Swappable power modules
Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
Specifications APC Symmetra PX AIO 48kW Scalable to 48kW 400V – SY48K48H-PD
Output |
|
Output power capacity |
48.0 KWatts / 48.0 kVA |
Max Configurable Power (Watts) |
48.0 KWatts / 48.0 kVA |
Nominal Output Voltage |
230V , 400V 3PH |
Output Voltage Note |
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage |
Output Voltage Distortion |
Less than 2% |
Output Frequency (sync to mains) |
50/60 Hz +/- 3 Hz user adjustable +/- 0.1 |
Output Frequency (not synced) |
60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal |
Other Output Voltages |
380, 400, 415 |
Load Crest Factor |
Unlimited |
Topology |
Double Conversion Online |
Waveform type |
Sine wave |
Overload Operation |
10 minutes @ 125% and 60 seconds @ 150% |
Output Voltage THD |
< 2% for 0 to 100% linear load and < 6% for full non linear load |
Output Voltage Tolerance |
+/-1% static and +/- 5% at 100% load step |
Bypass |
Built-in Static Bypass |
Input |
|
Nominal Input Voltage |
400V 3PH |
Input frequency |
40 – 70 Hz |
Input Connections |
Hard Wire 5-wire (3PH + N + G) |
Input voltage range for main operations |
340 – 477 V |
Input Total Harmonic Distortion |
Less than 5% for full load |
Type of Input Protection Required |
gL fuse |
Other Input Voltages |
380, 400, 415 |
Maximum Short Circuit Withstand (Icw) |
30.0 kAmps |
Maximum Input Current |
98.0 A |
Input Power Factor at Full Load |
0.99 |
Batteries & Runtime |
|
Battery type |
VRLA |
Included Battery Modules |
4 |
Typical recharge time |
3 hour(s) |
Nominal Battery Voltage |
+/-192 V (split battery referenced to neutral) |
End of Discharge Maximum Battery Current |
165.0 A |
RBC Quantity |
4 |
DC Overcurrent Protection |
1008 A |
Extendable Run Time |
1 |
Battery Volt-Amp-Hour Capacity |
13824 |
Extended Run Options |
APC-Symmetra-PX-All-In-One-48kW-Scalable-to-48kW-400V |
End of Discharge Battery Voltage |
+/-154 V |
Efficiency in Battery Operation |
94.0 % |
Maximum Available Short Circuit Current |
4 kAmps |
Overload Operation |
10 minutes @ 125% and 60 seconds @ 150% |
Communications & Management |
|
Interface Port(s) |
DB-9 RS-232 , SmartSlot |
Control panel |
Multi-function LCD status and control console |
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : configurable delays |
Emergency Power Off (EPO) |
Yes |
Available SmartSlot™ Interface Quantity |
2 |
Physical |
|
Maximum Height |
1991 mm , 199.1 CM |
Maximum Width |
600 mm , 60.0 CM |
Maximum Depth |
1070 mm , 107.0 CM |
Rack Height |
42 U |
Net Weight |
796.0 KG |
Shipping weight |
858.0 KG |
Shipping Height |
2140 mm , 214.0 CM |
Shipping Width |
848 mm , 84.8 CM |
Shipping Depth |
1210 mm , 121.0 CM |
Environmental |
|
Operating Environment |
0 – 40 °C |
Operating Relative Humidity |
0 – 95 % |
Operating Elevation |
0-999.9 meters |
Storage Temperature |
-15 – 40 °C |
Storage Relative Humidity |
0 – 95 % |
Storage Elevation |
0-15000 meters |
Audible noise at 1 meter from surface of unit |
61.0 dBA |
Online thermal dissipation |
7719.0 BTU/hr |
Protection Class |
NEMA 1 |
Conformance |
|
Approvals |
EN 50091-1, EN/IEC 62040-1-1, EN/IEC 62040-3, Eurobat General Purpose, FCC Part 15 Class A, ISO 14001, ISO 9001, VFI-SS-111 |
Standard warranty |
1 year on-site repair or replace with factory authorized Start-Up |
General |
|
Bypass Connection |
5 wire (3PH + N + G) |
Bypass Protection Device |
80.0 |
Max Bypass Input Current |
80.0 A |
Kata Kunci Terkait :
APC Symmetra PX AIO 48kW 400V, SY48K48H-PD, jual ups apc SY48K48H-PD, harga ups apc SY48K48H-PD, spesifikasi ups apc SY48K48H-PD, beli ups apc SY48K48H-PD, ups apc SY48K48H-PD